|
VIDEO
MOTION DETECTORS
Reliable and cost-effective, these
units are widely used to secure indoor areas. Their compact size,
low voltage requirements, and simple on-screen programming menus
make them excellent for covert applications. Single, Four and
Eight Channel Units.
| VMD
1001 | |VMD
1004 | | DS-1PL | | DS-LAN | | DS-16 | DS-20-OF
| |
|
DTT
- Time/Date/Titler The DTT is the solution for inserting
T/D in consumer VCRs or for your convert or mobile applications.
Ultra small unit has a two line display and a low power design. |
|
|
The color PiPc is a state-of-the-art picture in
a picture device designed specially for the security industry.
Automatic inset picture enabling or swapping the pictures full-screen can be
initiated by an alarm input. Simple front panel
push buttons can also turn on or off the
inset picture, swap pictures, and even freeze the picture which
can be positioned anywhere |
|
|
9 and 16 Camera Video Motion Detector
9 or 16 Channel MultiDisplay Video Motion Detector with One Digital and 2 Analog Monitor Outputs. Integrated 16X3 Mini Matrix Switching and multiscreen display gives this device display versatility. Independent camera masking areas, sensitivity and target size for Indoor or Fixed Lighting Outdoor Motion Detection applications. One common alarm output but when used in conjuntion with the AL-16 will give 16 independent camera alarm outputs. Full remote programming software included.
| MS-9
| | MS-16 | | MTIUDL Software | |
|
AL-16
The Alarm Box provides individual alarm outputs from a Multiplexer. One can set addresses on the Alarm Box for 256 addresses (0-255) on the Multiplexer. The Alarm Box has a master alarm output that is active when any of the other channels are active.
| Manual | |
 |
The Premade Cable Adapter is designed to use off the shelf premade cables to install CCTV equipment and connect them to a single 12VDC wall adapter without any wire cutting or splicing. This adapter has an individual power LED and short circuit protection for each camera. A master fused power switch and power LED for all four cameras.
|
Cutsheet
| |
