The DTT-Pro single-channel Date-Time-Titler overlays date, time and camera identification onto a video image, identifying precisely when and where an event has taken place. The output signal may be displayed on a monitor, recorded on a VCR/DVR, or printed on a video printer. The characters have full programmability in 8 gray scales along with background in 8 gray scales. In the event the video input fails or not used the DTT-Pro will output a composite video image with the T/D Title information visible. Full 7.5-24V DC or AC Operation. Power input full protected from surge and lightning with screw terminal earth ground.

 
 

 

 

DTT-Pro Front View

DTT-Pro Rear View

Download the DTT-Pro Operation Manual in PDF Format

You will need Acrobat Reader to view this file.Use the link below to obtain the correct version for your machine.
Get Acrobat Reader

The DTT-Pro is a low cost Time & Date Generator with the addition of a 20 Alpha-Numeric Character On/Off Selectable.

This ultra small unit passively inserts the T/D information into a composite video signal allowing the video to pass through the DTT-Pro even when power is disconnected.

Low power design can operate from 7.5-24 V DC @ 65mA or 24VAC @ 100 mA , even from a standard 9V battery. The internal battery backup will hold the T/D information for months.

Two line display can be positioned vertically anywhere on the screen and programmed easily from the front panel pushbuttons.

EIA/NTSC or CCIR/PAL units available and also as a titler only.
STANDARD FEATURES

Video

 

Video Input / Output

 BNC - 1 VP-P Input +/- 20%, 1V P-P Output 75 Ohm Term. or UnTerm.
Video Format NTSC/EIA or PAL/CCIR
   

Date-Time Format               

On-Screen Display

 On/Off Selectable
MMM-DD-YY HH:MM:SS A (A-AM, P-PM) 12Hr
MMM-DD-YY HH:MM:SS 24Hr
DD-MMM-YY HH:MM:SS A (A-AM, P-PM) 12Hr
DD-MMM-YY HH:MM:SS 24Hr
YY-MMM-DD HH:MM:SS A (A-AM, P-PM) 12Hr
YY-MMM-DD HH:MM:SS 24Hr
   
Control /Programming  
Control Interface 3 front panel pushbuttons: Select, Up, and Down
Status Indicators 2 front panel LEDs: Power(Green) and Setup(Yellow)
   
Back-Up Battery Internal Rechargeable NiMH battery
   
Size / Weight / Power  
Size

3-3/8(D) x 2-5/8(W) x 1-1/8(H)  85mm(D) x 62mm(W) x 30mm(H)
Weight 9 oz / .28 Kg
Power Multi Voltage Input 7.5-24 V DC @ 65mA or 24VAC @ 100 mA
  2.1mm DC Power Connector Center Positive
   
Warranty 2 year parts and labor