The DTT is the solution for inserting T/D in consumer VCRs or for your convert or mobile applications.

 
 

 

 

DTT Front View

DTT Rear View

Download the DTT Operation Manual in PDF Format

You will need Acrobat Reader to view this file.Use the link below to obtain the correct version for your machine.
Get Acrobat Reader

The DTT is a low cost Time & Date Generator with the addition of a 20 character titler.

This ultra small unit passively inserts the T/D information into a composite video signal allowing the video to pass through the DTT even when power is disconnected.

Low power design can operate from 7-15 VDC, even from a standard 9V battery. The internal battery backup will hold the T/D information for months.

Two line display can be positioned vertically anywhere on the screen and programmed easily from the front panel pushbuttons.

EIA/NTSC or CCIR/PAL units available and also as a titler only.
STANDARD FEATURES

Video

 
Video Input / Output BNC  passive video loop-through
Video Format NTSC,PAL and SECAM versions
   

Date Display               

On-Screen Display

 Month,Date and Year

USA Date Format    

ABCDEFGHIJKLMNOPQRST
(12Hr Time)    MMM-DD-YY  HH:MM:SS-A

European Date Format    

ABCDEFGHIJKLMNOPQRST
(24Hr Time)    DD- MMM- YY  HH:MM:SS-

Time Display     

Hours, Minutes, and Second  XX:XX:XXFormat
   
Control /Programming  
Control Interface 3 front panel pushbuttons: Select, Up, and Down
Status Indicators 2 front panel LEDs: Power(Green) and Setup(Yellow)
   
Back-Up Battery 1 year,internal rechargable NiCad
   
Size / Weight / Power  
Size

3-3/8(D) x 2-5/8(W) x 1-1/8(H)  85mm(D) x 62mm(W) x 30mm(H)
Weight 12 oz. / .34Kg.
Power 7 - 15VDC @ 32ma
  2.1mm DC Power Connector Center Positive
   
Warranty 2 year parts and labor